2010 Pricing & Descripton of Service
|
| Service |
Price |
Description |
| Buoyancy Compensator (BCD) |
$15 |
•Completely disassemble, clean, and carefully inspect all parts for damage, corrosion, and
wear.
•Replace any parts as appropriate.
•Reassemble and test.
|
Cylinder,
visual inspection † |
$15 |
•Inspect to standards of Professional Scuba Inspectors, Inc. (PSI)
•We must remove all decals (including old vip labels, Nitrox tank wraps and
MOD stickers) in
order to inspect. You may purchase replacements if you wish.
•If appropriate, use an eddy current device to further evaluate the threads.
•Clean the neck/valve threads, lubricate and install new neck/valve O-ring.
•Install valve on cylinder, and test for leaks.
•Affix evidence of inspection decal.
|
Cylinder,
hydrostatic test † |
$39 |
•Test the cylinder at a DOT-authorized hydrostatic test facility.
•Rinse cylinder interior and throughly dry.
This service is normally combined with a separately priced visual inspection. |
Cylinder,
interior tumble |
$34 |
•Dry tumble cylinder with abrasive appropriate for cylinder composition.
•Blow out cylinder with high pressure air to remove all dust. |
Cylinder,
shot blast exterior |
$26 |
•Completely strip paint from cylinder.
•Refinish with shot blast texture. |
Cylinder and Valve
Oxygen service |
$80 |
•Wash cylinder interior with environmentally safe detergents to remove hydrocarbon
contamination.
•Rinse cylinder interior and throughly dry.
•Completely disassemble valve, clean, and carefully inspect all parts for damage/corrosion/wear.
•Replace any parts as appropriate, and always replace the burst disk and all O-rings using
oxygen-compatible products.
|
Regulator PM,
per stage
Dive Rite Brand |
$45 |
•Maintain 1st and 2nd stage, additional second stage, SPG, and BCD hose end.
•Completely disassemble, clean, and carefully inspect all parts for damage/corrosion/wear.
•Replace any parts as appropriate, and always replace all soft parts and seats.
•Assemble, test, and tune to factory specifications.
•Check the submersible pressure gauge for accuracy across a range of pressures.
•Inspect the high-pressure swivel, and replace O-rings.
•Inspect all hoses, clean and lubricate the BCD hose end.
• Note that pricing is per stage. For example, an octopus with a 1st stage, 2nd stage and backup 2nd
stage would be a total of three regulator stages. |
|
|
The Fill Express Service Policy
|
|
Customer Satisfaction -- Your complete satisfaction is our goal. If any service from us does not
meet your expectations, we will readjust or service the item again at no charge within 60 days from the
date of service.
Estimates -- We are happy to offer you an estimate of repair costs. We will not perform any
service which exceeds the estimate by $25 without your prior approval.
Partials -- We accept only complete equipment for full service. We do not accept components
only (for example, only a second stage) or perform partial repairs.
Unclaimed Items -- Not responsible for items left over 60 days.
|
|
† Fill Express does not recommend renewing the visual inspection or hydro-static test for aluminum 6351-T6
alloy SCUBA cylinders because of issues associated with sustained load cracking (SLC) in those cylinders.
 for more information about aluminum 6351-T6 cylinders.
|
|
